RCBS 40 SW 10mm Auto Carbide 3 Die Set 22115

Updated September 23, 2026

An RCBS three die carbide taper crimp set for 40 Smith and Wesson and 10mm Auto, part number 22115, Group B, calling for shell holder number 27, in the gray RCBS box. The set holds the carbide sizing die, the expanding die and the taper crimp seating die stamped TC SEAT. A spare stem and a lock ring are loose in the tray. The carbide ring in the sizer lets straight wall pistol brass size with no case lube at all, which saves a messy step when a loader is running several hundred rounds at a sitting. The taper crimp is the correct crimp for a rimless auto pistol case that headspaces on the mouth, since it presses the flare back against the bullet without curling the mouth. Condition is good with bright steel, clean threads and light handling marks. Several loose primers and a few grains of powder are in the box tray and should be treated as live. Buyer must comply with all applicable local, state and federal laws regarding the purchase, possession and transport of ammunition. Estimated Value: $40 to $65 based on comparable recent sales. Sold as-is. Photos are the most accurate description of this lot. Written descriptions are a guide only and may contain errors. Please review all photos before bidding.

More lots in this auction

• RCBS 25-06 Remington 2 Die Full Length Set
• RCBS 264 Neck Expander Die 39811 with Plug
• RCBS 8mm Remington Magnum 2 Die Set 16001
• RCBS 6.5mm-06 2 Die Full Length Set 27801
• RCBS 22-250 Remington 2 Die Full Length Set
• RCBS 308 Winchester 3 Die Set and Primer Tool
• Lyman 357 Magnum 3 Die Pistol Set in Box
• RCBS 38 Special SWC 3 Die Set 18306 Group B

See all lots in Ferguson Family Ammo, Reloading, and Outdoor Supplies →