Lee 429 Bullet Lubricating and Sizing Kit Die

Updated September 23, 2026

A Lee bullet lubricating and sizing kit for .429 inch bullets in the red Lee storage box with the printed instruction sheet. The sizing die is stamped LEE-429-B6. The lot is the one die plus the box and the sheet. A Lee sizing kit is what a cast bullet shooter uses to bring home cast or swaged bullets to a uniform diameter and to push lubricant into the grooves at the same time. The die screws into an ordinary single stage press, the bullet is pushed base first through the die with a punch, and it comes out sized true and lubed in one stroke, ready to load. The .429 inch size is for 44 Special, 44 Remington Magnum and 44-40 Winchester. Cast bullets that are not sized true will lead a barrel and throw wild shots, so this is an inexpensive way to fix that problem. Dies are clean with light surface oil and normal handling marks, threads and lock rings are intact and no rust or galling is visible in the photos. Condition is very good. Estimated Value: $15 to $25 based on comparable recent sales. Sold as-is. Photos are the most accurate description of this lot. Written descriptions are a guide only and may contain errors. Please review all photos before bidding.

Register & bid on this lot at Bidspirit →

More lots in this auction

• RCBS 45 ACP Carbide Sizer and Seater Die Pair
• Lee 300 Winchester Magnum 3 Die Set 90539 Crimp
• RCBS 38-40 Winchester 3 Die Set Vintage Box
• Lee 22-250 Remington 3 Die Set with Crimp 90503
• RCBS 380 Auto 3 Die Carbide Taper Crimp Set
• Lee 338 Winchester Magnum 3 Die Set 90546 Crimp
• RCBS 270 Winchester 2 Die Full Length Set 13501
• Lee 243 Winchester Collet 2 Die Set 90709

See all lots in Ferguson Family Ammo, Reloading, and Outdoor Supplies →