Milwaukee Magnum Holeshooter 3-8 Inch Drill 0224-1

Updated September 23, 2026

A Milwaukee Magnum Holeshooter corded electric drill, catalog number 0224-1, with a 3-8 inch capacity keyed chuck. The nameplate reads 0 to 1200 RPM, 4.5 amps, 120 volts at 60 hertz, Milwaukee Electric Tool Corp of Brookfield Wisconsin, grounding required, serial number 057412769. The Holeshooter is the drill that Milwaukee built its reputation on and the one tradesmen buy when a homeowner grade drill has already burned up, because the all metal gear case and the heavy field windings take abuse that plastic housings will not. The red housing paint is worn through to the aluminum in places, the gear case is scratched and stained, and the chuck shows rust and old grease. The three wire cord and plug are intact with no visible splices or cuts and the strain relief is in place. The chuck jaws close square. The drill has not been plugged in or run by Crawford Auction Service. Condition is fair to good. Authenticity and function have not been verified by Crawford Auction Service. Estimated Value: $25 to $45 based on comparable recent sales. Sold as-is. Photos are the most accurate description of this lot. Written descriptions are a guide only and may contain errors. Please review all photos before bidding.

More lots in this auction

• Craftsman 3-8 Inch Corded Electric Drill 315-11430
• Skilsaw 5380 Circular Saw 7-1-4 Inch 12 Amp
• Craftsman SAE Flex Head Socket Wrench Set of 6
• MIT HART Impact Socket Sets and Torx Bit Set
• Craftsman Metric Wrench Set of 16 and Adjustable
• Craftsman 14 In Pipe Wrench and Adjusting Pliers
• Stanley Level Hex Key Sets and Hand Tool Lot of 14
• Chicago Pneumatic CP733 1-2 Inch Air Impact Wrench

See all lots in Ferguson Family Ammo, Reloading, and Outdoor Supplies →