30/50 Pressure Switch for Well Pumps
Updated August 11, 2026
| Lot number | 497 |
| Auction | Tuesday Liquidation Auction Salt Lake City 8/18/26 |
| Date | August 18, 2026 at 6:00 PM MDT |
| Auction house | ATX Auctions Utah |
| Location | Salt Lake City, Utah |
Condition: NEW FACTORY SEALED Brand: Everbilt Model: EBPS3050 UPC: 659647000340 This pressure switch signals the pump to start when the water system drops to 30 PSI (factory set) and stops at 50 PSI (factory set). This switch is to be used with submersible well or jet pumps. It can be wired 115-Volt or 230-Volt. This switch must be used in conjunction with a well pressure tank. The air pressure in the well tank, when empty of all water, must be set to 28 PSI, or the switch will not operate properly.. Turns pump on at 30 PSI, off at 50 PSI. Cap removes for easy adjustment. Can be wired 115-Volt or 230-Volt. For use with submersible well or jet pumps. Motor wires are connected to the 2 middle posts (color does not matter). Breaker box wires are connected to 2 outside posts (color does not matter). 2-spring design allows for adjustment of cut-in and cut-out pressure settings. Adjustments to springs should only be made by users with good knowledge of well systems.
Register & bid on this lot at Bidspirit →
More lots in this auction
- Commercial Electric 1-Gang Weatherproof Box
- 32-7/8" 18 TPI Bi-Metal Blade (3-Pack)
- Tough Tape 35 ft. x 1-1/4 in. Tape Measure
- 16ft Brown Mysummer Weather Stripping
- 1in Slats Alabaster Cordless Vinyl Mini Blind
- VTech Cordless Phone DECT 6.0, Speakerphone
- Portwood 24 in. Towel Bar in SpotShield Nickel
- Easy Mount 12-in Grab Bar, ADA Chrome, 500 lb
See all lots in Tuesday Liquidation Auction Salt Lake City 8/18/26 →