1 HP Cast Iron Submersible Pump with Switch

Updated August 7, 2026

Lot number	13s
Auction	Tuesday General Merchandise Product Liquidation 8/11
Date	August 11, 2026 at 9:00 AM CDT
Auction house	ATX Auctions Olive Branch
Location	Olive Branch, Mississippi

MSRP: $204 Notes: Box slightly damaged but the product is new not damaged Condition: NEW OTHER Brand: Basement Watchdog Model: BWSS100 UPC: 717301122408 The Basement Watchdog 1 HP submersible sump pump has the highest capacity of all of the pumps in our Basement Watchdog line. It features a powerful and energy-efficient permanent split capacitor (PSC) motor providing 6,540 GPH at 0 ft. lift and 4,440 GPH output at 10 ft. lift. The 2-inch discharge helps maximize output. Simply put, the BWSS100 moves water out fast, so your basement stays dry. Unlike other similar sump pumps, this one uses only 6.3 Amps, paying for itself in energy savings. The stainless steel and cast iron construction, along with upper and lower ball bearings, and dual carbon ceramic shaft seals, protect the motor for years of service. The caged dual float switch provides not one but two floats for added protection, while the protective cage around the float prevents debris or other wires from interfering with the floats. Easy to install, the caged dual float switch can be adjusted to any level. The vented and curved bottom prevents debris from building up under the primary float. The float switch is easy to install and can be adjusted to any level. Get the best level of protection from flooding with this high-capacity sump pump. Amperage (A): 6.3 A. Cord Length (ft.): 10. Discharge Flow @ 0 ft. (gallons/hour): 6540. Discharge Flow @ 0 ft. (gallons/min): 109. Discharge Flow @ 10 ft. (gallons/hour): 4440. Discharge Flow @ 10 ft. (gallons/min): 74. Discharge Flow @ 15 ft. (gallons/min): 51. Features: Bottom/End Suction, Corrosion Resistant, Self-Priming, Thermal Overload Protection. Housing Material: Stainless steel. Impeller Material: Cast Iron. Maximum Horsepower (hp): 1. Maximum Pressure (PSI): 0. Maximum Working Temperature (F): 104. Minimum Sump Basin Diameter: 11 to 14. Minimum working temperature (F): 40. Outlet Diameter Connection (in.): 2 NPT. Pack Size: 1. Power Type Required: AC. Product Weight (lb.): 36 lb. Pump Switch Type: Dual Reed. Vertical Lift (ft.): 22. Voltage: 115v. Certifications and Listings: CSA Listed. Product Depth (in.): 5.875 in. Product Height (in.): 19 in. Product Width (in.): 9 in. Switch-Off Height (in.): Fully Adjustable. Switch-On Height (in.): Fully Adjustable. Maximum Horsepower (hp): 1. Discharge Flow @ 0 ft. (gallons/hour): 6540. Impeller Material: Cast Iron. Features: Bottom/End Suction. Features: Self-Priming. Features: Corrosion Resistant. Housing Material: Stainless steel. Features: Thermal Overload Protection.

1 HP Cast Iron Submersible Pump with Switch

More lots in this auction

See all lots in Tuesday General Merchandise Product Liquidation 8/11 →